No Show Mesh

no-show.jpg
no-show.jpg

No Show Mesh

from 18.90

Floriani No Show Nylon Mesh

 

No Show" Nylon Mesh is designed for a single layer application, and features the most stable no show mesh on the market.  Floriani No Show Nylon Mesh is a 1.5 oz sheer cutaway available in white and beige. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments. The unique embossing pattern of this product makes it a staple in your embroidery stabilizers. Hoop the stabilizer to the back of the garment or fabric for soft flexible support for light fabrics and designs. This product is also available in a fusible version which eliminates the need for messy spray adhesives.

 

Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4").

Will not shadow through on light weight cottons and knits when worn against the skin.

Perfect foundation for crazy patch quilting.

Ideal foundation for patches, emblems and free standing embroideries.

Use the fusible version to cover up scratchy stitches on the back of the embroidery

Floriani's No Show Mesh Product Identity

White    FMWH1210    12" x 10 yds     

Beige    FMBE1210     12" x 10 yds      

Floriani's No Show Nylon Mesh Fusible Product Identity

White   FMFWH1210    12" x 10 yds     FMFWH2010    20" x 10 yds   

Black    FMFBL1210    12" x 10 yds     

Beige    FMFBE1210    12" x 10 yds      FMFBE2010    20" x 10 yds     

 

 

Size:
Colour:
Type:
Quantity:
Add To Cart

To use Floriani No show Nylon Mesh:

1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.

2. Hoop the stabilizer to the back of the garment. 

3. Place the embroidery frame on to the machine. Complete the layout and centering of the design.

4. Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.

5. After the design is complete, remove the garment from the machine and embroidery hoop. Trim the stabilizer as close to the design as possible.

*Tip! If embroidering knit, don't forget to use topping!

*Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the mesh when hooping, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.

To use Floriani No show Nylon Mesh Fusible:

1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.

2. Fuse the entire piece of the stabilizer on to the back of the garment using a low to medium temp, dry iron. (260°F, silk setting) When pressing the stabilizer on to the garment, the iron surface should touch the fabric, not the stabilizer.

3. Hoop the garment and place the embroidery frame on to the machine. Complete the layout and centering of the design.

4. Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.

5. After the design is complete, remove the garment from the machine and embroidery hoop. To remove the No Show Mesh Fusible, re-heat the stabilizer and peel it back gently to the design and trim.

6. *Tip! If embroidering knit, don't forget to use topping!

7. *Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the fusible mesh, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.